Port Angeles, WA to Victoria BC

Tuesday 8/1/2012 - Port Angeles, WA to Victoria BC

http://www.victoriaharbour.org/f_lowercauseway.php

We checked the weather in the morning and there was another high wind warning for the Straits of Juan De Fuca. The wind would be on the beam (side) this time. We decided to try to cross the Straits early in the morning to avoid the stronger afternoon winds. Before we left the docks we switched the fuel tanks to even out the weight. I switched the supply and return at the filter, but I forgot to open the fuel intake valve for the new fuel tank. Fortunately, the lazarette was open and when I turned on the engine I noticed that vacuum gauge was in the red. We shut off the engine and quickly found my oversight.

We felt the strong winds shortly after leaving Port Angeles and hoisted the sails. We reefed when the winds picked up and sailed most of the way to Victoria. The last quarter of the trip, the wind increased and the waves started pounding Bliss from the side.  We put the sails down and motored the rest of the way into Victoria, BC.

Victoria harbor looks large on a chart, but the place is quite compact.  The boat and sea plane traffic is bustling.  When you enter the harbor, you need to keep your speed down and follow the marked bouys.  We found the Canadian customs dock with the help of the marina patrol. It was an easy check-in. We called customs via a yellow phone on the dock - there was no physical boarding of the vessel. Once we cleared customs and were given our number, we called Victoria Harbor causeway with the radio on channel 66.  We had made reservations in advance, so they knew where our slip was when we called them.  We tucked into our slip with the help of people on the dock.  We introduced ourselves to the folks in the boats around us and made quick friends. We gave Bliss a good wash.  The weather was lovely - sunny with a nice breeze.  While we were putting the boat away, I found the reefing system had jammed up while we were sailing. If we had tried to shake the reef out, we would have found the car inside the boom jammed.  However, since we doused the sails we were not aware of the problem. I took the boom car end out and gave the car a couple of taps with a hammer to get it loose. I made a quick adjustment to the lines and the problem was solved.

We spent two wonderful days in Victoria. We had tasty dim sum, excellent pastries and had an incredible meal at a little French brasserie called L'Ecole.

We were witnesses to more crazy docking in Victoria.  While we were tidying up the boat, we heard a power boat across from us hit the dock.  We thought they were just a little unsure of the docking and would slow it down enough to get into the slip. However, the boat continued into the slip at full power.  We wish we would have had a video camera.  The boat continued into the slip at full speed and barreled into and up the stern of the power boat across from us.  WOW!  We scrambled off the boat to see if we could assist.  The driver of the boat was a mess.  We asked him to throw us a line.  He threw a stern line, but had no bow line to throw at the time.  He had tried to cover up the damage he did to the boat in front of him with encouragement from a lady on a boat across the way, but he couldn't hide it.  The flag pole on the stern of the power boat that he barreled into fell and almost hit the water.  We rescued the pole.  The port authority and Victoria police came later to take statements.  Was the driver of the boat under the influence? Hmmm.. Apparently while we were off site seeing, a power boat hit Bliss. The folks on our dock jumped on our boat to fend off the boat.  We were extremely fortunate to not have any visible damage.  In a way, we were glad we were not there to witness it. 

We had scrapped our itinerary before we got to Victoria and decided to keep an open plan for our trip.  If we found a place we liked, we would stay.  However, after encouragement from seasoned cruisers at the docks, we decided to try to make it to Princess Louisa Inlet.  We knew there was going to be more motoring than we had planned, but we were inspired and decided it would be worth it.  We had researched places to stay along the way so we felt comfortable making the trip.  We met so many generous and friendly people in Victoria.  Two of the cruisers invited us on their boats to share stories and tell us of their favorite spots in the area.

We sailed from Port Angeles to Victoria, BC, and stayed in Victoria for three days. We met some of the nicest cruisers there and managed to see quite a bit of the city.
                                         

Tres Beaux! Teehee

View from Bliss at the Causeway Docks

                                         

Bliss, True Love 2 and Crewless.

Port Angeles, WA

We arrived in Port Angeles before sundown, and tied up to the transient dock. Inspected our engine cooling intake and found some cool little critters in there!

Dock at Port Angeles
http://www.portofpa.com/marinas/port-angeles-boat-haven.html
 

Engine Intake Strainer with bits

Stowaway

Strait Of Juan De Fuca

We were feeling rested after our overnight trip, so we skipped Neah Bay and just kept going to Port Angeles. So glad we did, because we made record time sailing through the Straits of Juan De Fuca.                               


Moving right along.

Cape Flattery behind us.



Astoria, OR to Neah Bay, WA

Monday 7/30/2012 - Astoria, OR to Neah Bay, WA

While having breakfast we listened to the weather and bar report.  We checked the web as well and the conditions were calm for the Columbia River Bar crossing. Slack water was around 1230 so with mild conditions we decided to leave Astoria early around 0830 to take advantage of some of the ebb tide that was still running.

After crossing the bar and clearing the channel buoys, we turned north, and headed for longitude 124 deg 55. This route is farther out than most cruisers go - 30 miles out at Grays Harbor and coming in about 10 miles from the coast at Cape Flattery.  This route was recommended to us by other cruisers to avoid the crab pots that are closer to shore, especially if you are traveling at night.  We took this route coming down a couple of years ago and we didn't snag a crab pot.

We had an uneventful night motoring up the coast. It was quite chilly and wet so we decided to cut the watches from three hours to two.  With the radar and AIS combined, we were able to correlate the targets and see what fishing vessels or container ships look like on radar.

We rounded Cape Flattery around noon on Tuesday. At this point, we had two options.  One was to stay at Neah Bay just around the corner from Cape Flattery and rest. The other option, if we were feeling rested, was to continue to Port Angeles.  The wind was fairly strong from the west (behind us) and the current was headed in the same direction.  We called Bill for a weather check. There was a strong wind warning in the Straits of Juan de Fuca.  We decided to continue on to Port Angeles.  We both felt rested, the sun was shining and the conditions were in our favor.  We called Port Angeles and arranged for a spot on the transient dock, which is recommended if you are arriving after hours. At one point heading down the strait we recorded speeds of 8.5 knots! We made it to Port Angeles just before sundown.  We rinsed off the boat and had a delicious dinner and bottle of wine. The run to Port Angeles set us up nicely for a short sail the next morning across the Straits of Juan De Fuca to Victoria, where we planned on staying for a couple of days and then exploring the Canadian Gulf Islands.

Crossing the Columbia River Bar

 

Bouy 1 with guests

                

Passing Close to Research Bouy

Rainier, OR to Astoria, OR

Sunday 7/30/2012 - Rainier, OR to Astoria, OR

http://www.portofastoria.com/marina_west_boaterInfo.html
 

It was sunny with light wind on Sunday so we motored from Rainier to Astoria.  It was finally setting in that our trip we had been planning for so long was a reality.  We kept an eye on the engine and alternator belts constantly that day and monitored the weather to make sure we were going to be able to cross the Columbia Bar on Monday.

We pulled up to the docks in the Astoria West Basin in the afternoon.  The winds had kicked up considerably. While we were getting the boat secured with the dock lines, a huge motor boat crash landed into the slip next to us. I rushed over to help.  One of the guys on the boat threw me a dock line that wasn't attached to the boat.  He let go of all of the line and I ended up with a slack line to nothing! They finally got the boat secured after a few more bangs into the dock and angry shouts at each other.  We left Bliss to pay the dock fee at the marina.  A few minutes later the attendant for the marina came over and asked us if we had looked at our depth. He said that they were experiencing some pretty drastic tides at the marina and we may want to consider moving from the dock because it could get quite shallow.  We looked at the depth sounder and the reading was six feet! We fired up the engine and quickly moved to an empty slip.  A little while later, after we got settled, we witnessed another crash landing. A couple in a large sailboat, ended up sideways to their slip.  We heard a big crack as their boat made contact with the dock and another boat.  What a day!

As the sun set, we made our final preparations for our transit up the coast and checked the conditions for the Columbia Bar crossing. Here is our preparation list for the next leg:

Take down grill

Sail tie on sail cover

Secure below

Check steering cable and rudder post

Upload GPS waypoints to cockpit

Check anchor and insert Nerf balls into chain locker holes

Rig jacklines

Tethers and strobes out

Turn dorades around

Check engine oil

Check transmission oil

Check coolant

Check belts

Check engine intake strainer

Check Racor Vacuum gauge after startup

Check propeller shaft

Inspect batteries

Take cover off man overboard module

Lash down anchor

Gloves and hats out

Prepare meal plan

Weather check

Rig main halyard

Check lifelines and stanchions

Check water level and top off

Draw up watch schedule

Check navigation lights

Douse WiFi antenna

Take TV down

Watch Schedule

2100-2400 Sean

0000-0300 Geralyn

0300-0600 Sean

 

 

Portland, OR to Rainier, OR

We had been planning this trip and preparing the boat for months.  The departure day was finally here.  We were well provisioned and just received a shipment of tools and accessories from the Meyer girls at Ace Homeworks - (love them!), we were all set.  It was the beginning of our adventure.  

We left the marina with clear skies at 0730 to the music of Richard Strauss' Also Sprach Zarathustra (better known as the opening music to 2001 Space Odyssey) playing from our friend Matt's boat.  Very moving.
 

When we brought Bliss home from Seattle we navigated the Columbia River at night and found that it was not the most fun thing to do.  Since this was our vacation and we had time, we decided to travel on the river by day only.  Rainier is about halfway between Portland and Astoria on the river so we decided to stay there on Saturday night.  After clearing the Interstate Bridge and Vancouver KQ9049 Railroad bridge we headed down river to our first destination.  

About an hour before reaching Rainier, I (Sean) went below to make lunch.  I heard a loud ticking noise coming out of the engine compartment under the companionway steps.  I opened the top step and the noise got louder.  I knew this was not a normal sound and decided to investigate further. I removed the companionway steps, which gives full access to the engine, and noticed one of the alternator belts was coming apart.  We got the boat out of the traffic lane and turned off the engine.  I cut the remainder of the belt off with a knife to prevent it from damaging anything.  We started the engine back up and motored slowly to Rainier.  We managed to get to the docks without any problem.  Even though we had a spare belt, we decided to buy a replacement rather than deplete our spares. We had not replaced the two large alternator belts before so we called our friends Bill and Yvonne for some advice on how to replace them. Bill assured us that it's quite easy.  We called a cab to get us to the auto parts store in Longview to pick up replacement belts.  We weren't sure we were going to see Bliss again when the redneck driver of the dark-tinted-window cab started talking about guns - especially after we saw how excited he was about his assault rifle that he keeps above his bathroom door. :) 

After returning safely to the boat we set about replacing the belts (we found out that we have to replace both belts at the same time). Bill was right, it was actually quite simple. The adjustment arm made tensioning the belts easy. We fired up the engine for about five minutes and monitored the movement of the belts and the motion looked good.

While we were working on the engine, we heard another boat pass by and then some shouting and a motor rev up.  Boom!  Another sailboat had hit our bow pulpit as they were trying to dock.  Fortunately, there wasn't any major damage to either boat.  Phew!

We broke and alternator belt coming out of the river. We managed to fix it fairly quickly, so we made a nice dinner to celebrate our first breakdown of the trip!



New Alternator Belts
 

Broken Alternator Belt

Dock at Rainier
http://marinas.com/view/marina/3833_City_of_Rainier_Marina_OR_United_States

Leather Wheel Cover

This past weekend, Geralyn installed a wheel cover. It took hours to herringbone stitch the leather cover on the wheel, but it looks and feels great!

Monel Rivets For Mounting Radar Reflector To Mast

This weekend we installed a Tri-Lens Radar reflector on the mast. The instructions called for monel rivets to mount the aluminum bracket that holds the radar reflector. Pretty happy with how it turned out.
I was so nervous going up the mast that I forgot to take a picture of the radar reflector!

Solar Panels From Above

I thought it would be interesting to take a picture of the solar panels from above and see how it matched up with my imagined placement of the solar panels. Not bad!

HMCS Oriole

Spinnaker Sailing with Bill & Yvonne

NMEA over TCP/IP

Our boat systems use the old NMEA0183 standard for communications. Regardless, there are ways to tie these old communication systems into modern ones. Here's a cool way that I found to relay onboard navigation info to my IPod touch.

Rose Point Coastal Explorer (CE) software has the ability to serve as an NMEA server. You simply enable NMEA server in the CE configuration. If you have a wired or wireless network onboard (easy to do with a Linksys or Netgear 12v router), you simply point other devices that are networked, to the IP address of the NMEA server, and you can get any information that the NMEA server has.  I wanted to be able to test cheaply, so I found this app called NMEA remote.

I enabled NMEA server in CE, then configured NMEA remote to get data from the NMEA IP address.
Now my IPod touch, or IPhone, or IPad will display position, course, speed, depth etc.

Blog Post From Radio Email #2

<No message body found>

Test Post To Blog From Radio Email

<No message body found>

Riverplace Cruise

This week, we took the Bliss downtown for a little mini-cruise. This involves crossing under, or lifting nine bridges. Luckily, we did not have to lift the most critical of the bridges, the I-5 Interstate Bridge on the Columbia River. Lifting this bridge is a big deal because it backs up traffic on a major interstate. Lifting the bridge is highly restricted during certain hours. We managed to make it under by four feet. Going under the bridge is very unnerving because from below, it always looks like we are going to touch.

Next bridge is the Vancouver Railroad Bridge. The bridge operator opened for us, and we motored down the Columbia and around Kelly Point to the confluence with the Willamette River. The Willamette runs through downtown Portland. Our first bridge going up the Willamette is St Johns, which is one of the prettiest bridges. The bridge is 200 feet high, so we did not have to raise it. Next bridge was another railroad bridge. This bridge was already raised, but as we were approaching, it closed. No problem. We called the bridge operator on the radio and he said to wait a little while for a train to come through. We told him that we would need 60 feet after the train went through. He raised to 62 after the train, and across we went. Next bridge up on the Willamette is the Freemont Bridge. The Freemont Bridge is 175 feet, so no need to raise that one. Next up is the Broadway Bridge. Broadway Bridge clearance was 80 feet, so no need to raise that one. Next up was the Steel Bridge. The Steel Bridge is currently at 17 feet, so we called on the radio and asked for a lift. Bridge operator told us that there was a train and several light rails coming through, and to wait for 30 minutes. After about 30 minutes, the train was done, and he opened to 62 feet. We crossed under the steel bridge, and made contact with Hawthorne bridge, who kind of coordinates with some of the other bridges. After some discussion about our mast height, river levels and bridge clearance, they decided to lift all three, Burnside, Morrison and Hawthorne for us. This was relief, as we hate to go under bridges and have marginal clearance.

We found a nice little slip on the inside break wall at River place, and we expect to be here for a couple of days. We want to return to Portland Sunday. The marathon is that day, and starts at 0800, so we need to be through the Hawthorne Bridge at 0700.

AIS Tracks

This past weekend, we took the Bliss out for a sail. We did a downwind run with several gybes, then turned upwind. The wind was 10kts. She sails like a dream with her new sails and rigging. We also had a chance to test the AIS and tracks. Glad to say the AIS is still working as designed.

12 Volt LED TV

We bought this 12 Volt LED TV with a retractable arm. I was a little worried about mounting on the bulkhead, especially since the forward berth is on the other side. Our friend Bill, who is an all around wizard came over, and suggested carriage bolts, that have a smooth head. The carriage bolts turned out great!

Defective Comnav AIS Transceiver Update

The Comnav Mariner AIS that I installed a few weeks ago turned out to be defective. After installing, I checked my transmission history, and found that I was only transmitting about once a day if lucky. I brought this up to Comnav support, and initially, they insisted that I had misconfigured the settings. I exchanged setting and screen captures with them, and they finally agreed that the unit appeared to be defective in the transmission area. When I brought this up to my local vendor, he too doubted that it was the unit, and said that most likely, I had misconfigured the unit. He said that they had sold dozens of these units, and never had a problem. I stuck to my guns and sent the unit back to Comnav. After a few weeks and some prodding, I got a new unit and reinstalled. I'm happy to say that the new unit is behaving normally, transmitting every 15-20 minutes, and verifiable through http://www.marinetraffic.com/.

I wonder how many fishermen or sailors install the unit, test once and walk alway, thinking that this important collision avoidance system is working as designed. It's important to check that the technology is working as advertised.

Solar Panel Project Part 2

This past weekend, we installed all the wiring from the panel to the charge controller and from the controller to the batteries. We also drilled a hole and installed a cable through-hull to run the cable inside the boat. For the cable, we used a mix of 10 awg and 8 awg. We used 10 awg to make the connections at the panel because 8 awg would have been too difficult to route inside the junction boxes. We used 8 awg for the run from the panels to the batteries in order to have less than 3% loss according to these calculations:

Each panel watts = 140w

Panel rated voltage = 17.7v

140/17.7 = 7.9 Amps

7.9 Amps x 2 (2 panels) = 15.8 amps

Cable run length = 30-40 ft

According to this guide:

http://www.projectfreepower.com/solar-wire-gauge-awg-calculation

We need 6-8 awg cable in order to have less than 3% loss. We had a look at 6 awg, and decided that it was way too big to run and bend around inside the boat, so we settled on 8 awg. We found these super awesome step-down (8 to 10 or 12 awg) butt connectors that are also heat shrink, so we used those wherever we had to splice the cable. Here are some pictures of the second part of the project.

We taped large dark garbage bags on the panels to prevent from getting shocked when making the connections, but noticed that the panels were still producing quite a bit of amps and volts, so we put the cockpit cushions on top and water jugs to prevent the cushions from flying off.

 This is the hole hole for the cable, and the mounting holes for the cable through-hull

 This is what the cable looks like once inside the boat. We put a "drip loop" in case water gets in, it will not travel to the controller.

 This is a "service loop" in case we ever need to lengthen the cable or put in a junction box for another panel.

 These are the super cool 8-10/12 step-down heat shrink butt connectors. The picture taken after crimping but before heat shrinking.

 The negative cable from the charge controller goes to the load or ground side of the shunt.

 The orange cable is the positive cable from the controller to the batteries. There is a 25 amp fuse in-line, within 7" of the battery.

 Below is the junction box with the leads going to the next panel.

 This is what the cable through-hull looks like from the outside.

 Below is the junction box with one pair of cables coming from the next panel, and a pair of cables going towards the charge controller.

 Below is the open controller. The top set of leads goes towards the batteries. The bottom set of leads goes towards the solar panel array. There is also a 2 amp load going to the starter battery.

Here's the controller sealed up and putting out 14.6 amps. Below the controller is another 25 amp fuse on the positive cable from the solar panel array.